Pan Configuration Example #4

Flush Mounted Pan with Chain Drop Shade Holders

    pan_example_04.JPG (39371 bytes)

Back

Starting at the top of this example is a 3 drop pan flush mounted to the ceiling.  The shade holders are mounted to the pan with chain.  The total drop from the ceiling to the bottom of the shades in this example is approximately 15".  The drop from the pan to the shade holders can be adjusted by changing the length of the chain.  Some unique antique chain sets cannot be lenghtened.  Most unique antique chains can have the total drop reduced with the removal of chain links.

This configuration can be applied to all number of drops (2 drop, 3 drop, 4 or more drops). 

To configure this type of fixture you will need to select:

a pan,  type of chain,  type of shade holders (switched or un-switched),   a set of shades

 

If your search for an antique light fixture led you directly to this page, then you will want to visit our home page so you can see the over 1000 antique lighting items we offer on this site.  Oldhouselights Home Page